We will now put on the on/off switch.
Materials used
| No. | Part Name | Image | 
|---|---|---|
| 1. | Zircon PCB x1 |  | 
| 3. | Switch x1 |  | 
Tools needed
| No. | Part Name | Image | 
|---|---|---|
| 1. | SOLDERING IRON |  | 
| 2. | SOLDER |  | 
| 3. | WIRE CUTTERS |  | 
Switch
Put the switch in the 3 holes. The direction does not matter. Solder all three holes and cut the excess length of pin with a wire cutter

