Materials used No. Part Name Image 1. M3 Metal Female-Female Standoffs x12 2. M3 Bolts x24 3. Line Sensor x3 Tools needed No. Tool Name Image 1. Phillips Head Screwdriver The line sensor board has 4 holes, of which 1 is placed closer to the edge. There should be 3 of the same shape on the Zircon board. Use 4 bolts and 4 standoffs to sandwich the line sensor. The bolts should be screwed in from the side with electrical components (side DOES matter) Secure line sensor Attach the sensor to the Zircon board with 4 more bolts. The standoffs should be straight. If not, please make sure you put the line sensor in the correct orientation and facing down. Repeat 2 more times. The result should look like this
